English
العربية
Français
Español
Deutsch
Italiano

 
Automotive materials

Orinko provides customers with customized totaloverall solutions for automotive materials withbased on continuously innovative high-performance products, providing customers with and presents pleasant new solutions in automotive modified plastics with lightweight, safe, tactilesoft touch, high-performance, green, low-carbon, and eco-environmentally friendly products., bringing pleasant new solutions to the field of automotive modified plastics.
Automotive polypropylene materials - Low density materials 
Automotive polypropylene materials - Low linearity materials 
Automotive polypropylene materials - Thin walled materials 
Automotive polypropylene materials - Long glass fiber materials 
Automotive polypropylene materials - Micro foaming materials 
Automotive polypropylene materials - Low emission materials 
Automotive polypropylene materials - Soft touch materials 
Automotive polypropylene materials - Imitation texture materials 
Automotive styrene materials 
- ABS materials 
Automotive styrene materials 
- ASA materials 
Automotive styrene materials 
Automotive styrene materials 
Automotive styrene materials 
Automotive styrene materials 
Automotive materials 
Automotive polyamide materials 
- PA materials 
Automotive elastic materials 
- TPV materials 
Automotive elastic materials 
- TPE materials 
Low Density Material refers to modifed materials with low number of fillers to achieve the dimensional shrinkage physical properties and thermal resistant properties of high filler materials, thus achieving weight reduction.
Low Linearity polypropylene composites have the advantages of higher strength, stifness, toughness, and dimensional stabilityIn addition, depending on the material application mainly for exterior trim, the material has excellent performance inweathering, thermal and oxygen aging, light resistant and adhesive properties.
Thin wall materials are modifed materials with high fuidity, high modulus and high toughness, the so-called "three high" materials.Thin-wall design has various advantages such as reducing the weight of parts, lowering manufacturing energy consumption, and improving production rhythm, and it is an important trend in automobile lightweighting.
The company has joined hands with OWENSCORNING to develop a fully automatic imported long glass fiber production line,introduced its advanced LFT die head equipment and rich experience in product production, and established a comprehensivestrategic partnership in raw material technology, production line construction and application etc. The special long glass fiberimmersion technology ensures the uniform dispersion of glass fiber and good immersion of glass fiber and base material, with 20-60% glass fiber content series LFT-PP, LFT-PA material types, the comprehensive performance of the produced products reaches the international leadina level.
Micro foam iniection moulding is a process of injection moulding with polypropvlene as the base material, which, under theaction of internal pressure of gas, makes the middle layer of the product densely covered with closed micropores while thesides have a dense skin structure, thus achieving the purpose of material saving and weight reduction.
Micro foam iniection moulding is a process of injection moulding with polypropvlene as the base material, which, under theaction of internal pressure of gas, makes the middle layer of the product densely covered with closed micropores while thesides have a dense skin structure, thus achieving the purpose of material saving and weight reduction.
Soft touch material is made by adding elastomeric compound with good touch feeling and using glass fiber to improve rigidity, so that it has good soft touch feeling and visual texture while ensuring rigidity.
By adding fibers, the part can be molded to have a fabric-like effect without the need for additional decorative materials.
ABS is a terpolymer of acrylonitrile-butadiene-styrene. lt has good toughness, weather resistance, chemical resistance, fluiditv, and good dimensional stability, and is an extremely versatile thermoplastic engineering plastic.
ASA is a terpolymer of acrylonitrile, styrene and acrylate. lt is an engineering material developed in response to theshortcominas of ABS. which has poor weatherina resistance.The resin itself has excellent weather resistance and can be used outdoors without coating, electroplating and other surface protection.
PMMA has excellent weathering performance and surface hardness, but its touchness is poor. ASA has excellent toughness and weathering resistance. but the low surface hardness of ASA leads to insufficient scratch resistance PMMA/ASA material combines the advantages of both PMMA and ASA. with super high gloss, emissivity and scratch resistance.
PC/ABS is a mixture of polvcarbonate and acrylonitrile-butadiene-styrene copolymer, which has improved PC notch sensitivity, processability, etc., and combines the advantages of both PC and ABS to provide excellent overall mechanical properties compared to ordinary materials.
PC/ABS reinforced material is an alloy material of polycarbonate and acrylonitrile-butadiene-styrene copolymelreinforced by glass fiber or mineral powder flling, which has excellent rigidity and heat resistance properties.
High-gloss PC paint-free material, suitable for one-time processing and molding, with high product qualification rate and environmental friendliness.
PC/PBT is a copolymer blend of polycarbonate and polybutylene terephthalate that combines the toughness and dimensional stability of PC with the chemical resistance of PBT.
Polyamide (PA, commonly known as nylon) has excellent chemical resistance and high temperature resistance.
Orinko Nylon Resin has been extensively verified by various products in the market for a long time, and has won the trust of many customers. Including PA610, PA612,PA1010,PA1012, PA6I/6T,MXD6. 
TPV, also known as thermoplastic dynamic vulcanized rubber, has a two-phase microstructure ("sea-island" structure),one is the plastic phase, also known as the "sea phase." which provides processing properties for the product, the other is the rubber phase, also known as the "island phase " which gives the product good elasticity. More
The P-TPE elastomer material and the "ORINKO IMSS" iniection moulding technology based on P-TPE material by Orinko can be widely used in the injection moulding of large thin-walled skin products, replacing the traditional soft skin moulding processes such asleather covering, plastic lining and negative mould blistering, greatly improving production efficiency and This wil greatly improve production efficiency and product competitiveness. More
Orinko Advanced Plastics Co.,ltd. is an innovator and is dedicated to developing high performance Polymer Materials.Including Nylon/Polyamide,Biodegradable material,  Engineering Plastics etc.

Contact Us

No.2 Luhua Road,Boyan Science Park,Hefei,Anhui Province,China

Mobile: +86-13013179882
Email: futao@orinkoplastic.com
            futao@orinko.com.cn
Copyrights 2022 Orinko Advanced Plastics Co., Ltd. All rights reserved. Sitemap |  Privacy Policy