Automotive Industry Application - Orinko Advanced Plastics Co. Ltd

Home » Applications » Automotive Industry Application

Automotive Industry Applications

Thermal management system·Braking system·Power system

Automotive Pipe

Fuel Pipes Brake Hoses Corrugated Hoses/Anti-Static Hoses Cooling Tubes/Air Conditioning Tubes Intake and Exhaust Pipes Water Chambers Pipe Fittings Connectors I-shaped tube Water pipe joint Spray pipe Intercooler inlet pipe

Automotive Engine Periphery

Valve cover Oil and gas separator Oil Pan PTC Thermostat Silencer Flange plate Electronic water pump High temperature nylon project Water Valve

Automotive Sealing Systems

Glass Guides Internal/External Water Cut Glass Guide Corners Injection Molding of Triangular Windows Sunroof Seal Sunroof Drain

Automotive Chassis Systems

Dust Cover Spring Shock Absorbers Other components

Automotive Exterior/Interior Systems

Wheel Brow Trim

Deflectors

Lampshade Seal

Wipers

Cup Mats

Cup Holders

Automotive Foot Mats

Injection Molding Surface for Dashboard and Door Trim

Automotive other components

Cables

3D Air Fiber Cushion Core

High Pressure Braided Hoses and Cable Pipes

Others

For Fuel Pipes

Materials Grade: LN0252HIP, LN6252HIP, LN6261HI

Characteristic: Long Chain Polyamide Compound

Description:Automotive Fuel Pipes made of long chain polyamide compound provide excellent fuel resistance, high temperature resistance, corrosion resistance and low permeability, ensuring the reliability and safety of the automotive fuel system.

Item	Unit	Value
Density	g/cm³	1.01-1.04
Tensile Strength	MPa	38-40
Tensile Modulus	MPa	480-1200
Shore D	/	67-71
HDT	℃	43-45

For Brake Hoses

Materials Grade: LN6051HIP, LN2057HIP

Characteristic: Long Chain Polyamide Compound

Description:Air Brake Hoses made of long chain polyamide can provide excellent performance and reliability while reducing vehicle weight, conforming to the trend of energy conservation and environmental protection, and helping to improve the safety of vehicle performance.

Item	Unit	Value
Density	g/cm³	1.03-1.07
Tensile Strength	MPa	38-45
Tensile Modulus	MPa	450-600
Shore D	/	65-69
HDT	℃	40-45

For Corrugated Hoses/Anti-Static Hoses

Materials Grade: LN6051FR, LN6051FER

Characteristic: Long Chain Polyamide Compound and Flame Retardent

Description:The application of our Polyamide on flame retardant corrugated hoses and anti-static hoses can provide excellent flame retardant properties, corrosion resistance and antistatic properties, providing an important guarantee for the safety performance and stability of vehicles.

Item	Unit	Value
Density	g/cm³	1.12-1.18
Tensile Strength	MPa	30-36
Tensile Modulus	MPa	1200-1500
Shore D	/	70-75
HDT	℃	46-52
Flame Resistance	UL94	V2
Surface Resistance		10⁸

For Cooling Tubes/Air Conditioning Tubes

Materials Grade: LN6262HIP, LN0261HIP, LN0262HI

Characteristic: Long Chain Polyamide Compound

Description:Our polyamide compounds are available for single-layer and multi-layer pipes. When used in new energy cooling tubes and automobile air conditioning tubes, it can provide excellent high temperature resistance, high strength, corrosion resistance, coolant resistance, hydrolysis resistance, and easy processing. Provide stable and reliable solutions for the cooling system and air conditioning system of new energy vehicles. Its lightweight, flexible and customizable nature also helps simplify installation and extend tube life.

Item	Unit	Value
Density	g/cm³	0.9-1.05
Tensile Strength	MPa	24-50
Tensile Modulus	MPa	500-2000
Shore D	/	64-70
HDT	℃	42-55

For Intake and Exhaust Pipes

Materials Grade: LN6661HIPGF20, LN6651HI

Characteristic: Glass Fiber Reinforced and Polyamide Compound

Description:The application of our Polyamide compound on automobile intake / exhaust pipes can provide excellent high temperature resistance, corrosion resistance, low permeability and pressure resistance, providing a stable and reliable solution for the intake system and exhaust system of automobile engines plan. Its lightweight, flexible and customizable nature also helps to simplify the installation process and increase the life of the tubing.

Item	Unit	Value
Density	g/cm³	1.08-1.25
Tensile Strength	MPa	55-130
Tensile Modulus	MPa	2050-6400
Shore D	/	75-82
HDT	℃	60-233

For Intake and Exhaust Pipes

Materials Grade: COPE-B2555BK

Characteristic: TPEE,High temperature and aging resistant

Description:Excellent resistance to high and low temperatures,Good processing stability,Good resistance to chemicals,grease and aging.

For Water Chambers

Materials Grade: LN6291GF30,LN6091GF30

Characteristic: Glass Fiber Reinforced, Salt Resistant and Long Chain Polyamide Compound

Description:The application of our Polyamide compound on water chambers tubes can provide excellent performance and provide an important guarantee for the stable operation of electronic equipment and electrical systems. And help to simplify the connector design and installation process, and improve reliability and service life.

Item	Unit	Value
Density	g/cm³	1.36-1.38
Tensile Strength	MPa	190-195
Tensile Modulus	MPa	9500-10500
Shore D	/	82-87
HDT	℃	200-230

For Pipe Fittings

Materials Grade: LN6021HIGF30,LN6221HIGF30,LN6621GF30

Characteristic: Glass Fiber Reinforced and Long Chain Polyamide Compound

Description:Pipe Fittings made of our polyamide compound are widely used in passenger cars and commercial vehicles. When used in automotive pipe fittings, they can provide excellent performance, ensure the stability, reliability and safety of the pipe fittings, and help simplify the installation process. Improve the service life of pipe joints.

Item	Unit	Value
Density	g/cm³	1.20-1.38
Tensile Strength	MPa	125-188
Tensile Modulus	MPa	6500-11500
Shore D	/	80-85
HDT	℃	172-245

For Connectors

Materials Grade: LN6221GF20FR

Characteristic: Glass Fiber Reinforced and Long Chain Polyamide Compound

Description:The application of our polyamide compound on connectors can provide excellent performance and provide an important guarantee for the stable operation of electronic equipment and electrical systems. And help to simplify the connector design and installation process, and improve reliability and service life. It is a halogen free materials, and good for Automotive Circuit Connectors, Pipe Fittings, Junction Boxes.

Item	Unit	Value
Density	g/cm³	1.20-1.38
Tensile Strength	MPa	125-188
Tensile Modulus	MPa	6500-11500
Shore D	/	80-85
HDT	℃	172-245

For Glass Guides

Materials Grade: TPVE65-75A,TPVE65-85A

Characteristic: Excellent aging and UV resistant

Processing Performance:Good extrusion surface, smooth and delicate, good extrusion cross-section, dimensional stability

For Internal/External Water Cut

Materials Grade: TPVE63-75A,TPVE65-75A

Characteristic :Good mechanical properties,
Good static/semi-dynamic sealing performance,
Excellent UV resistance,Good aging resistance,
Low VOC, Low odor, Low fogging.

Processing Performance:Good extrusion surface, smooth and delicate,Extruded sections of shape objects, dimensional stability,Replace EPDM and save processing costs.

For Glass Guide Corners

Materials Grade: TPVM64-80A

Characteristic :Good mechanical properties,
Good static/semi-dynamic sealing performance,
Excellent UV resistance,Good aging resistance,
Low VOC, Low odor, Low fogging.

Processing Performance:Good extrusion surface, smooth and delicate,Extruded sections of shape objects, dimensional stability,Replace EPDM and save processing costs.

For Injection Molding of Triangular Windows

Materials Grade: TPVM65-65A

Characteristic :Good mechanical properties,
Good static/semi-dynamic sealing performance,
Excellent UV resistance,Good aging resistance,
Low VOC, Low odor, Low fogging.

Processing Performance:Good extrusion surface, smooth and delicate,Extruded sections of shape objects, dimensional stability,Replace EPDM and save processing costs.

For Sunroof Seal

Materials Grade: TPVM65-75A

Characteristic :Good mechanical properties,
Smooth to the touch,Excellent contact strength,
The surface is dry and delicate.

Processing Performance:Good injection molding/extrusion processing performance,Good dimensional stability.

For Sunroof Drain

Materials Grade: TPVM65-75A

Characteristic :Good mechanical properties,
Smooth to the touch,Excellent contact strength,
The surface is dry and delicate.

Processing Performance:Good injection molding/extrusion processing performance,Good dimensional stability.

For Dust Cover

Materials Grade: TPVB60-90A,TPVB60-40D

Characteristic :Excellent flexural properties and fatigue resistance, excellent weather resistance and ozone aging resistance,Good resistance to liquid media,
Wide range of operating temperatures (-40℃~120℃),
Smooth to the touch,Excellent contact strength,
The surface is dry and delicate.

Processing Performance:Good melt strength,
Good blow molding processability.

For Spring Shock Absorbers

Materials Grade: TPE513-50AT

Characteristic :Excellent shock absorption and rebound properties, excellent weather resistance and aging resistance,
Good compression set resistance, wide operating temperature (-60℃~80℃)

Processing Performance:Good melt flow properties,
Beautiful injection molding surface.

For Other components

Star Sheath/Sheathing/Decorative Cover/Cushion/Ignition Cables

For Valve cover

Valve cover

For Oil and Gas Separator

Oil and gas separator

For Oil Pan

Oil pan

For PTC

PTC

For Thermostat

Thermostat

For Silencer

Silencer

For Flange plate

Flange plate

For Electronic water pump

Electronic water pump

For Water valve

Water valve

For High temperature nylon project

High temperature nylon project

For I-shaped tube

I-shaped tube

For Water pipe joint

Water pipe joint

For Spray pipe

Spray pipe

For Intercooler inlet pipe

Intercooler inlet pipe

Automotive Industry Applications

Automotive Pipe

Automotive Engine Periphery

Automotive Sealing Systems

Automotive Chassis Systems

Automotive Exterior/Interior Systems

Wheel Brow Trim

Deflectors

Lampshade Seal

Wipers

Cup Mats

Cup Holders

Automotive Foot Mats

Injection Molding Surface for Dashboard and Door Trim

Automotive other components

Cables

3D Air Fiber Cushion Core

High Pressure Braided Hoses and Cable Pipes

Others

For Fuel Pipes

For Brake Hoses

For Corrugated Hoses/Anti-Static Hoses

For Cooling Tubes/Air Conditioning Tubes

For Intake and Exhaust Pipes

For Intake and Exhaust Pipes

For Water Chambers

For Pipe Fittings

For Connectors

For Glass Guides

For Internal/External Water Cut

For Glass Guide Corners

For Injection Molding of Triangular Windows

For Sunroof Seal

For Sunroof Drain

For Dust Cover

For Spring Shock Absorbers

For Other components

For Valve cover

For Oil and Gas Separator

For Oil Pan

For PTC

For Thermostat

For Silencer

For Flange plate

For Electronic water pump

For Water valve

For High temperature nylon project

For I-shaped tube

For Water pipe joint

For Spray pipe

For Intercooler inlet pipe

Quick Links

Contact Us