ORINKO Polyamide 612 (PA612)This long-chain nylon is produced through the condensation polymerization of ethylenediamine and dodecanedioic acid. The dodecanedioic acid used can be derived either from chemical synthesis or microbial fermentation. ORINKO manages the entire PA612 production process, from backward raw material production to forward resin polymerization and polyamide compounding, with its own dedicated factories.
ORINKO Polyamide PA612 resin has a series of excellent properties, such as:
Very low water absorption and excellent dimensional stability
Very good chemical and weather resistance
Excellent hydrolysis resistance
Lower molding shrinkage
Excellent mouldability
High melting point: 215℃
Nylon 6 Resin
Nylon 6 Flame Retardant
Nylon 6 Glass Fiber Reinforced
Flame Retardant Level：V-0, 5VA,f1.
UL ID:E328304/E493989.
Glass Fiber Content: 1%-40% .
Toughness, Impact Strength, Melting Point, Color and other properties can be customized.
Nylon 66 Resin
Nylon 66 Halogen-free Flame Retardant
Nylon 66 Halogen Flame Retardant
Nylon 66 Red Phosphorus Flame Retardant
Nylon 66 Glass fiber Reinforced and Toughened
Glass fiber content:20%-60%.
Anti-static, Coolant-resistance, hydrolysis-resistance, chemical-resistance, salt corrosion- resistance, good long-term fatigue resistance, low dielectric loss.
Nylon 610 Raw resin
Nylon 610-Halogen-free, Phosphorus-free, Flame Retardant
Nylon 610-Enhanced anti-static
Nylon 610-Glass Fiber Reinforced and Toughened
Corrosion-resistant reinforced PA610 for pipelines
Flame retardant level：V-0, 5VA.
UL ID:E328304/E493989.
Glass fiber content:30%-50%.
Anti-static, Coolant-resistance, hydrolysis-resistance, chemical-resistance, salt corrosion- resistance, low temperature- resistance, good long-term fatigue resistance, low dielectric loss.
Nylon 612 Raw resin
Nylon 612-Halogen-free Flame Retardant
Nylon 612-Powder Coating
Nylon 612-Reinforced for Fule Lines
Nylon 612-Carbon/Glass Fiber Reinforced
Flame retardant level：V-0, 5VA.
UL ID:E328304/E493989.
Glass fiber content:20%-60%.
Low precipitation,Anti-static, Coolant-resistance, hydrolysis-resistance, chemical-resistance, salt corrosion- resistance, low temperature- resistance, good long-term fatigue resistance, low dielectric loss.
Nylon 1012 Raw resin
Nylon 1012 -Reinforced for Fuel line Outer Coating
Nylon 1012-Glass Fiber Reinforced
Nylon 1012-Elastomeric
Glass fiber content:20%-60%.
Anti-static, Coolant-resistance, hydrolysis-resistance, chemical-resistance, salt corrosion- resistance, good long-term fatigue resistance, low dielectric loss.
Pure PA612 can usually be used as bristles/fibers for toothbrushes, monofilament, and cable core rings,
Internal coating of petroleum pipelines and cable coating.
The modified PA612 can be widely used in the automotive industry, machinery manufacturing(ol containers, textile machinery parts), and in the electronicindustry for making battrey casings, instrument rails, etc. It can also be used as bristles of toothbrushes, monoflaments and cablecorerings, etc.lt can be customized in injection and extrusion grade according to customers requirements.
Automotive
Battrey
Cable
Toothbrushe
Packing Details : Standard Packing(lnner /Aluminum Film ,Outer/Paper bag or woven bag).
Packaging Details:25kg/bag,or 750 kg/1000kg per jumbo bag
Delivery Details :T+10days
Port of departure:Wuhu, Shanghai,Ningbo,Guangzhou.
As a comprehensive service provider,
Orinko offers all the essential technical support and marketing guidance needed for the successful processing
and selling of your products.
We are pleased to help you choose the material that best fits your requirements or to provide you with a customized formulation.
Get in touch with us to find the perfect solution for your application.
We are one of the largest listed companies in China for polymer modified materials, including polyamides, polyolefins, polystyrene, and engineering plastics. We have collaborated with multiple automotive companies, such as Volkswagen, Ford, Toyota, Honda, Audi, etc
Certificate
ISO9001
ISO14001
ISO45001
IATF16949
Smart Factory
In the past three years, our company has invested more than 1.5 billion yuan in digitization and smart factories, and it is expected to invest more than 500 million yuan in the next three years.
•National Pilot Demonstration Project for the Integration of Manufacturing and Internet Development: manufacturing and lean quality control capabilities for modified plastics.
•Anhui Industrial Internet Enterprise Level Platform: full lifecycle control industrial Internet platform for the production of new multi-functional composite materials. •Anhui Industrial Internet New Model Application Demonstration Project: new model application demonstration project for the manufacturing and lean quality control of modified plastics.
•Hefei Top Ten Industrial Empowerment Scenarios Demonstration Project: Demonstration of digital collaborative industrial internet in the high-performance fireproof material industry chain.
Initiate global layout and shoulder global supply responsibilities bravely
Global R&D Center
•Shanghai
Synthesis base
•Weifang, Shandong Province
Domestic modification R&D and production base
① East: Hefei + Anqing, Anhui Province
② West: Tongliang, Chongqing
③ South: Foshan, Guangdong Province
Overseas layout
① Chonburi Province, Thailand
② Mexico (Future Planning)
Inject impetus into the enterprise and industrial development with continuous innovation investment
Innovation capability-provide overall solutions
Start from home appliances, serve many industry leaders and become their strategic partners
Orink Advanced Materials Co., Ltd mainly focuses on the R&D, production and sales of high-molecular modified materials, aiming at providing complete material solutions with high performance and functions for its customers.
Devoted in this industry for decades, the comprehensive competitive edge of Orink has ranked the top in the modified materials, thus making it one of the high-molecular modified materials enterprises with the largest scale and widest customer coverage in China.The company contains Nylon, Thermplastic Elastomer,Polyolefines, Polystryrene, Engineering plastics,biodegradable mateirals and many other product platforms, including over 300 various kinds of high-molecular high-performance and functionalized products.
Our main customers: Volkswagen,Ford, SAIC-GM, Skoda, Audi, Toyota, Honda, Mazda, Mitsubishi, BYD, Geely Auto, GWM, Chery,DFM,JMC,JAC, Midea, Haier, Siemens, Hisense, Philips, Huawei, ZTE, Samsung etc.
What products/services does your company offer?
A:Orinko Plastics has Nylon(polyamide), Thermplastic Elastomer,Polyolefines, Polystryrene, Engineering plastics,biodegradable mateirals and many other product platforms, including over 300 various kinds of high-molecular high-performance and functionalized products.
What is the property of Orinko, factory or trading company?
A:Orinko is a manufacturer and owns 6 factories locate in Anqing, Chongqing, Guangdong, Hefei, Wuhu, and have more than 2000 staffs, including 300 R&D personnel.
Are there different grades of long-chain nylon available?
A:Yes, there are various grades of long-chain nylon available, each designed for specific applications. Manufacturers offer a range of formulations with varying mechanical and thermal properties to suit different requirements
What are the key characteristics of long-chain nylon?
A:Long-chain nylon exhibits exceptional strength, durability, and abrasion resistance. It also possesses a high melting point, excellent chemical resistance, and low moisture absorption, making it suitable for a wide range of applications.
What's your Product Range?
A:Plastic raw material: PLA 、 PBAT、PA、ABS、ASA、PMMA/ASA&PMMA、PC/ABS、PC/ABS、TPV、TPE and Provide overall solutions for modified materials. Our products are widely applied to national mainstay industries and emerging industries like Home Appliances, Automobile, 5G, Electronic and Electrical, Medical, Rail Transit, Home Building Materials and Security.
How can I reach you？
Mobile/Whatsapp: +86-13013179882
Email: futao@orinkoplastic.com
futao@orinko.com.cn
Polyamide＆Compound＆Resin Orinko About Us Products Applications Factory News Contact
No.2 Luhua Road,Boyan Science Park,Hefei,Anhui Province,China